bizhub 501/421/361 (Version 2) 10-27
Administrator mode settings
10
Print Paper Size
% Specify paper size for outputting received documents.
– The default setting varies depending on the setting for "Letter/Ledger over A4/A3".
!
Detail
To enable the setting for the print paper size, set "Tray Selection for RX Print" to "Auto".
Incorrect User Box No. Entry
When having equipped with the optional hard disk, specify action for a situation where an unregistered user
box number is specified for fax RX using a user box.
- [Print]: Specify this to print received documents.
- [Show Error Message]:Handled as a communications error.
- [Auto Create User Box]: Select this to create a user box with the specified number automatically for
saving a document.
To Next Page
Loading...
Need help?
General
