bizhub 501/421/361 (Version 2) 4-3
Registration of basic information
4
4 Registration of basic information
4.1 To begin operation
When starting operation of the product for the first time, register the following.
4.1.1 Required environment and equipment
The following table shows environment and equipment required to enable respective functions.
4.1.2 Network connection and settings
To use the function to transmit image data via a network connection such as network scan and network fax
functions, connecting this machine to the network and settings for network use are required.
Network connection
Connect a UTP cable (category 5 or later recommended) from the network to the Ethernet connector on the
machine.
Network settings
Assign an IP address to the machine and complete settings for the SMTP server, etc. For details, refer to the
User manual – Network Administrator.
Description Environment and equipment
Network scan function • Network connection
• Network settings
G3 fax function • Installation of the fax kit (optional)
• Connecting a modular cable
Network fax func-
tion
Internet fax • Installation of the IC-207 (optional) and hard disk (optional)
• Network connection
• Network settings
IP address fax • Installation of the fax kit (optional), IC-207 (optional) and hard disk
(optional)
• Network connection
• Network settings
To Next Page
Loading...
Need help?
General
