4
Registration of basic information
4-6 bizhub 501/421/361 (Version 2)
4.3 Optional settings
Depending on the use, additional settings are also available.
Fax/Scan programs
The destination and scan settings can be registered together as a single program. This is convenient for
frequently scanning documents and sending data under the same conditions. Use the touch panel of the
machine to specify the settings.
2
Note
For details, refer to "Scan/Fax Program" on page 9-40.
Setting display contents
Set the contents to be displayed when the [Fax/Scan] key is touched on the control panel.
2
Note
For details, refer to "Custom Display Settings - Scan/Fax Settings" on page 9-48.
To Next Page
Loading...
Need help?
General
