Select the control func. option in section 1 of
the advanced recording menu. Select the
function to be assigned with the controller
(1). Press the controller to set the function
(2).
The selected function can be changed by
moving the controller left or right in the
recording mode. Changes are set
automatically after five seconds or when
another camera button is pressed.
Refer to the appropriate sections for
information on the drive mode (p. 40), white
balance (p. 44), flash mode (P. 38), and
exposure compensation (p. 47).
54 RECORDING - ADVANCED OPERATION
The white balance, drive mode, exposure compensation, or flash mode can be set with
the controller. The function assigned to the controller is selected in section 1 of the
advanced recording menu (p. 52). Initially, no function is assigned. The white balance,
exposure compensation, and off options affect the movie recording mode.
CONTROLLER CUSTOMIZATION
Ctrl func.
Auto reset
Date imprint
Flash mode
Drive mode
White balance
Off
Exp. comp.
1
2
To Next Page
Loading...
