85
AUTO POWER OFF
To conserve battery power, the camera will shut down if an operation is not made within
a certain period. To restore power, press the main switch. The length of the auto-power-
off period can be changed in section 2 of the setup menu (p. 78): 1, 3, 5, 10, and 30
minutes. The length of the auto-power-off period is fixed at 10 minutes when the camera
is connected to a computer.
SHUTTER SIGNAL
When the shutter is released, a shutter signal will give a positive confirmation of the
operation. The signal can be turned off in section 2 of the setup menu (p. 78).
FOCUS SIGNAL
When the focus is confirmed, the focus signal will give a positive confirmation of the
operation. The focus signal can be turned off in section 2 of the setup menu (p. 78). Two
signals are available.
To Next Page
Loading...
