Konica Minolta SKR 3000 User Manual

3.1 Startup and shutdown
65
Chapter 3

AeroDR Generator Interface Unit
• When the Power Source Device is turned off,
power supply to the AeroDR Generator Interface
Unit is terminated. The LED (green) will turn o󰀨
on the AeroDR Generator Interface Unit.
LED (green)

AeroDR Generator Interface Unit2
• When the Power Source Device is turned off,
the power to the AeroDR Generator Interface
Unit2 is shut down, and the LED (green) on the
AeroDR Generator Interface Unit2 will go o󰀨.
LED (green)
• When using the AC adapter, turn the power
switch of the AeroDR Generator Interface Unit2
off, and confirm that the LED (green) on the
AeroDR Generator Interface Unit2 goes o󰀨.
LED (green)
Power switch

Generator Interface Unit 3
• When the Power Source Device is turned off,
the power to the Generator Interface Unit 3 is
shut down, and the LED (blue) on the Generator
Interface Unit 3 will go o󰀨.
• When using the GIU3 AC Adapter, Generator
Interface Unit 3 turns o󰀨 and the LED (blue) is
turned o󰀨 when the power cable from a wall out-
let is removed.
LED (blue)

AeroDR Battery Charger
• When the power cable is removed from the wall
outlet, the power of the AeroDR Battery Charger
is turned o󰀨 and the LED (green) is turned o󰀨.
LED (green)

AeroDR Battery Charger2
• Turn the power switch of the AeroDR Battery
Charger2 o󰀨, and conrm that the LED (green)
is turned o󰀨.
LED (green)
Power switch

Konica Minolta SKR 3000 Specifications

General

Brand	Konica Minolta
Model	SKR 3000
Category	Measuring Instruments
Language	English