Korg microSAMPLER User Manual

microSAMPLER
56
12. CHORUS (Stereo Chorus)
This effect adds depth and warmth to the sound by modulating the delay
time of the input signal. You can control the spaciousness by skewing the
LFO for the left and right signals.
DRY/WET .............................................................. [DRY, 99:1...1:99, WET]
Adjusts the balance between the effect sound and the direct sound.
MOD.DEPTH (Modulation Depth) ...............................................[0...127]
Adjusts the depth of modulation produced by the LFO.
LFO FREQ (LFO Frequency) .........................................[0.01...100.00 Hz]
Specifies LFO frequency. Higher values will make the LFO faster.
LFO SPRD (LFO Spread) ..........................................................[–180...+180º]
Specifies the LFO phase difference between the left and right channels.
PREDLY L, PREDLY R (PreDelayL, PreDelayR) ........................[0.0...50.0 ms]
Specify the delay times for the left and right channels.
TRIM ...................................................................................................[0...127]
Adjusts the input level to the effect.
HI.EQ.GAIN (High EQ Gain) ..............................................[–15.0...+15.0 dB]
Adjusts the gain of the high-frequency equalizer.
13. FLANGER (Stereo Flanger)
This effect gives the sound intense modulation with a sense of changing
pitch. It is particularly effective when applied to sounds that contain a rich
overtone structure. It’s a stereo effect that allows you to control the spacious-
ness by skewing the LFO for the left and right signals.
DRY/WET .............................................................. [DRY, 99:1...1:99, WET]
Adjusts the balance between the effect sound and the direct sound.
DELAY ................................................................................. [0.0...30.0 ms]
Specifies the delay time in msec units.
MOD.DEPTH (Modulation Depth) .............................................. [0...127]
Adjusts the depth of modulation produced by the LFO.
FEEDBACK .................................................................................... [0...127]
Adjusts the amount of feedback for the left and right channels.
PHASE .....................................................................................................[+, –]
Switches the phase of the output and feedback.
LFO SYNC (LFO Tempo Sync) ......................................................... [OFF, ON]
☞p.48 “LFO SYNC (LFO Tempo Sync)”
LFO FREQ (LFO Frequency) .........................................[0.01...100.00 Hz]
☞p.48 “LFO FREQ (LFO Frequency)”
SYNC.NOTE (LFO Sync Note) ..................................................[8/1...1/64]
☞p.48 “SYNC.NOTE (LFO Sync Note)”
LFO WAVE (LFO Waveform) ............[SAW, SQUARE, TRIANGLE, SINE, S&H]
☞p.48 “LFO WAVE (LFO Waveform)”
Chorus
Chorus
LFO Spread
Dry / Wet
Dry / Wet
Trim
Trim
HEQ
LFO
HEQ
Left
Right
Wet: Stereo In - Stereo Out
Flanger
Flanger
Feedback
LFO Shape
LFO Spread
LFO
Dry / Wet
Dry / Wet
High Damp
Left
Right
Wet: Stereo In - Stereo Out

Korg microSAMPLER Specifications

General

Sampling Frequency	48 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Type	Sampler Keyboard
Keyboard	37 keys (velocity sensitive)
Number of Samples	36 per bank
Sequencer	16, 000 notes
Display	16 character x 2 line LCD
Outputs	L/Mono, R (1/4" Phone), Headphones (1/4" Stereo Phone)
USB	USB MIDI
Power Supply	AC adapter (included)
Inputs	Audio Input (1/4" Phone), Mic Input (1/8" Phone)