Korg MONOLOGUE - Korg Monologue Sequencer: Deleting Motion Sequences

25
Deleting a Motion Sequence
IfyoutrytorecordahMotionSequence,themessage“MotionFull”willbe
indicatedinthedisplay.Whenthishappens,thedisplaywillenterMOTION
CLEARintheSEQEDITmode,andyouwillbeabletodeleteoneoftheprevi-
ouslyrecordedMotionSequences.
1.
Check that the monologue is on the MOTION CLEAR function, in the
SEQ EDIT mode.
“MOTIONCLEAR”willbeindicatedinthedisplay.YoucandeleteMotion
Sequencesoneatatimehere.
TIP
PresstheEXITbuontocanceldeletingtheMotionSequence.
2.
Press buon 10, and select the motion to delete.
3.
Turn the PROGRAM/VALUE knob to select the message “CLEAR...?”.
4.
Press the WRITE buon.
TheselectedMotionSequencewillbedeleted.
5.
Press the EXIT buon.
6.
To continue recording a Motion Sequence, press the REC buon, and
press the PLAY buon to stop.
TIP
TodeleteallMotionSequencesatonce,usethe“MotionClear”func-
tionassignedtobuon7intheSEQEDITmode.Fordetails,referto
“MotionClear”(p.36).
12345678910 11 12 13 14 15 16
5
2
4
3