197
Sequencer operating mode
Write Global-Sequencer Setup dialog box
Reference
Delete Current Track
Select this command to delete the track currently selected in the
Track area (see “Track volume/status area” on page 178).
Solo Track
Select the track to be soloed, and check this item. You will hear
only the selected track, and the ‘Solo’ warning will flash on the
page header.
Uncheck this item to exit the Solo function.
Keep the SHIFT button pressed and touch one of the
tracks to solo it. Do the same on a soloed track to deactivate the
Solo function.
Copy/Paste FX
You can copy a single, or all four effects, between Styles, Perfor-
mances, STSs and Songs. To do this, choose the “Copy FX” and
“Paste FX” commands from the page menu of the Style Play,
Song Play or Sequencer modes.
To copy a single effect:
1. Select the source Song, Performance, Style or STS, then
• go to the page of the single effect you want to copy (FX A,
FX B, FX C, or FX D), or
• go to the Effects > FX Select page, to copy all four effects.
This may be useful if you want to copy two or three of the
four effects into different Performances, Styles or STSs.
2. Choose the “Copy FX” command from the page menu.
3. Select the target Performance, Style or STS, then go to the
page of the single effect you want to paste (FX A, FX B, FX
C, or FX D).
4. Choose the “Paste FX” command from the page menu.
To copy all four effects:
1. Select the source Performance, Style or STS, then go to the
Effects > FX Select page, to copy all four effects.
2. Choose the “Copy FX” command from the page menu.
3. Select the target Performance, Style or STS, then go to the
page of the Effects > FX Select page.
4. Choose the “Paste FX” command from the page menu.
Exit from Record
Only available in Record mode. Select this command to exit the
Record mode, and go back to the Main page of the Sequencer
Play mode (see “Sequencer Play - Main page” on page 174).
Write Global-Sequencer Setup dialog box
Open this window by selecting the Write Global-Song Setup
item from the page menu. Here, you can save MIDI Setups (see
“Midi Setup” on page 196), that are saved to the Global file.
Parameters saved in the Sequencer Setup area of the Global are
marked with the symbol through the user’s manual.
Song Select window
This window appears when you select the “Load Song” com-
mand from the page menu, or press the SONG SELECT button
in the SEQUENCER 1 sections on the control panel. See “Song
Select window” on page 78 for details.
Seq
Pa500-110UM-ENG.book Page 197 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
Need help?
General
