30
Turning the instrument on and listening to the demos
Turning the instrument on
First of all, turn the instrument on and familiarize yourself with the main screen. You can also listen
to the demos.
Turning the instrument on
Turn the Pa500 on by pressing the STANDBY button, located on the back panel.
After you turn the power on, a welcome screen is shown for a few seconds, and then the main display
(in Easy Mode) appears.
Turning the instrument on and listening to the demos
Standby (power) switch
Display
Demo buttons
Pa500-110UM-ENG.book Page 30 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
