279
Installing the Korg USB MIDI Driver
Mac OS X: Installing KORG USB-MIDI Driver
Appendix
Mac OS X: Installing KORG USB-MIDI
Driver
1. Insert the included CD into your CD-ROM drive.
2. Please double click on the “KORG USB-MIDI Driver.pkg”
in the “KORG USB-MIDI Driver” folder inside the CD-
ROM, to run the installer. Install it according to the
instructions appearing on-screen.
Driver’s ports
After installation, the following ports will be shown in you MIDI
application (e.g., sequencer) among the other MIDI devices:
Pa500 KEYBOARD: This allows for reception of MIDI messages
from the Pa500 (keyboard and controller’s data) to the MIDI
application running on the Mac.
Pa500 SOUND: This allows for transmission of MIDI messages
from the MIDI application running on the Mac, to the internal
tone generator of the Pa500.
Pa500-110UM-ENG.book Page 279 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
