140
Pad Record mode
Pad Edit: Velocity
Pad Edit: Velocity
In this page you can change the velocity (dynamics) value of
notes in the selected track.
After setting the various parameters, press Execute.
CV (Chord Variation)
Use this parameter to select the Chord Variation for editing.
Value
Velocity change value (±127).
Intensity
(Only available in Advanced mode). Use this parameter to specify
the degree to which the velocity data will be adjusted toward the
curve you specify in “Curve”.
Curve
(Only available in Advanced mode). Use this parameter to select
from six types of curve, and specify how the velocity will change
over time.
Start / End Vel. Value
(Only available in Advanced mode). Velocity change at the start-
ing and ending ticks of the selected range.
Start / End Tick
Use these parameters to set the starting and ending points of the
range to be modified.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to be modified.
Advanced
When this checkbox is checked, the “Intensity”, “Curve”, “Start
Velocity Value” and “End Velocity Value” parameters can be
edited.
Execute
Press this button to execute the operation set in this page.
Pad Edit: Cut
This function lets you quickly delete a selected measure (or a
series of measures) from the selected Chord Variation. All fol-
lowing events are moved back, to replace the cut measure(s).
After setting the various parameters, press Execute.
CV (Chord Variation)
Use this parameter to select the Chord Variation for editing.
Start
First measure to be cut.
Length
Number of measures to be cut.
Execute
Press this button to execute the operation set in this page.
Pa500-110UM-ENG.book Page 140 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
Need help?
General
