56
Song Play
Changing tracks volume
Changing tracks volume
During playback, you may wish to change each track’s volume, to create a mix “on the fly”.
Hint: As an alterna-
tive to using the TEMPO/
VALUE dial, hold the
track slider in the dis-
play, then move your fin-
ger up/down.
1 In Normal view, you can adjust each Keyboard track’s volume. Touch a
track and use the TEMPO/VALUE dial to change its volume
2 Press the TRACK SELECT button once to see tracks 1-8 (Track 1-8 view).
Note: Changes to
Song tracks will not be
saved, and will be reset
each time you press the
(Home) button. They
may also be reset while
pressing the << (Rewind)
button. To save changes,
you must edit the Song
in Sequencer mode.
3 Press TRACK SELECT once again to see tracks 9-16 (Track 9-16 view).
i
Keyboard tracks
i
In Track 1-8 view, the first 8
tracks of the selected Song are
shown.
In Track 9-16 view, the second
group of 8 tracks of the
selected Song are shown.
Pa500-110UM-ENG.book Page 56 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
