49
Selecting and playing Styles
The Pads
Quick Guide
The Pads
When the STYLE CHANGE LED is turned on, each Style can assign different sounds or patterns to
the four PADS. These sounds or patterns can be played along with the Keyboard and Style tracks.
Hint: You can see
which sounds or patterns
are associated to the
four Pads for the current
Style, by pressing the
Pad tab.
1 Press one of the four PADS.
2 If the selected PAD triggers an endless sound or pattern (i.e. an applause,
or a guitar arpeggio), pressing STOP will stop that sound.
Hint: You can open
the Pad Select window
to assign a different
sound or pattern to the
Pads, by pressing SHIFT +
one of the PADs.
3 Select a different Style, and see how the sounds or patterns assigned to
the PADS change.
You can even press more Pads at once, and play two or more sounds or patterns at the same
time. Pressing STOP stops them all at the same time. Keeping STOP pressed and pressing one of
the PAD buttons only stops that sound or pattern.
Adjusting balance between the Style and the keyboard
Balancing between the Keyboard and Style tracks may be useful, to gently fade them and adjust their
respective volume.
• While the Style is playing, use the BALANCE slider (next to the MASTER
VOLUME slider) to balance between the Keyboard and Style volume.
i
i
Pa500-110UM-ENG.book Page 49 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
