210
Global edit mode
MIDI: Filters
MIDI: Filters
Use this page to set up to 8 filters for the MIDI data received or
sent by the Pa500.
Midi In Filters
Selected MIDI IN filters.
Off No filter.
Pitch Bend Pitch Bend.
MonoTouch Mono (or Channel) After Touch.
PolyTouch Poly After Touch.
PrgChange Program Change.
SysExcl System Exclusive.
All CC All Control Change messages.
0…127 Control Change message #0…127. See “MIDI
Data” on page 273 for a list of available Control
Change messages.
Notes Note events.
Midi Out Filters
Selected MIDI OUT filters. See above for information on each
filter type.
Audio Setup: Metro / Speakers
This page lets you define various parameters for the Metronome,
and turn the Speakers on/off.
Metronome
Mode
Use this parameter to activate the metronome for the Style Play
and/or Song play operating modes.
Off No metronome is heard.
Style The metronome is always activated when playing
a Style.
Song The metronome is always activated when playing
a Song.
Style+Song The metronome is always activated when playing
a Style or Song.
Volume
Use this parameter to set the volume of the metronome.
Speakers
Speakers On/Off
Use this checkbox to turn speakers on or off. This option is use-
ful when the instrument is connected to an external amplifica-
tion system, and you don’t need the speakers.
Audio Setup: Master EQ
In this page you can access the semi-parametric Master EQ. This
EQ is placed at the end of the audio path, just before the audio
outputs.
Enable
Use this checkbox to enable or disable the Master EQ.
Low Gain
This parameter lets you adjust the low frequencies master equal-
ization. This is a shelving curve filter. Values are shown in deci-
bels (dB).
-18…+18dB Low gain value in decibels.
Mid (Middle) Gain
This parameter lets you adjust the semi-parametric middle fre-
quencies master equalization. This is a bell curve filter, centered
Mid
Mid
Gbl
Gbl
Gbl
Gbl
Gbl
Gbl
Pa500-110UM-ENG.book Page 210 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
