Kramer Electronics Ltd.
VIA Connect² – For User: Connecting via VIA Connect²
Changing the Default Encoding Format (Via Client > Settings icon on top left)
VIA Connect² enables you to change the default encoding format for your device. This is the
encoding format used for presenting and streaming video from your device to VIA Connect² to be
displayed on the main display. This change affects your device only.
The Web Administrator sets the default encoding format (see
Presentation on page 48).
VIA App/ Client: Two encoding formats are available:
• H. 264 – Default format if your operating system supports H. 264 encoding. This format
reduces bandwidth requirements when presenting high-resolution content.
• JPEG – If the operating system does not support H. 264 encoding, enable this format.
Figure 118: Settings Menu
To change the default encoding format:
1. In your computer taskbar, click the VIA icon. The taskbar menu appears.
2. Click Settings in the taskbar menu. The Settings screen appears.
3. Under Presentation Format Encoding, select the required encoding format. The default
encoding format is changed and saved for future sessions.
To Next Page
Loading...
