Kramer Electronics Ltd.
VIA Connect² – For User: Connecting via VIA Connect²
Installing or Running the VIA app
On a Windows PC
1. Make sure you are connected to the same network as the VIA Connect² device.
2. If you have no VIA app installed, enter the IP address of the VIA Connect² in a browser
window: The VIA device loads the Welcome page onto your display:
Figure 113: The VIA Collaboration page.
Select one of the following:
o Run VIA - Downloads a temporary Kramer VIA app which you can run
without installing to join the meeting.
o Install the VIA app – Install the VIA APP and use it to join meetings
and moderate.
o Join through Browser – Run the VIA Connect² menu in your browser.
3. Continue with Joining a Room with the VIA app on page 98
.
To Next Page
Loading...
