Kramer VIA Connect2 - VIA Pad Configuration

Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
27
 VIA Pad Configuration
VIA Pad is an optional touch-pad accessory that enables meeting participants to instantly join
a VIA meeting with their Mac or PC laptop. VIA Pad must be paired with your VIA Connect²
device before it is used to join meetings. The pairing procedure includes:
• Configuring VIA Pad Settings on page 27
.
• Pairing a VIA Pad Device on page 28.
Configuring VIA Pad Settings
VIA Connect² enables you to configure VIA Pad settings that define how a VIA Pad device
operates when paired with your VIA Connect² unit.
To configure VIA Pad settings:
1. Click Device Management > VIA Pad Configuration on the navigation pane.
The VIA Pad Configuration page appears.
Figure 22: VIA Pad Configuration Page
2. Select the following as required:
 Guest – Participant can Present by touching the VIA Pad device; the Kramer VIA
User Dashboard is not available.
 VIA Pad overrides Room Code – Participant can join a meeting without entering the
room code.
In the Room Name field, IP will be automatically populated.