Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Dashboard
4. Click Client Mode; The Client Mode tab appears.
If you do not see the desired network in the dropdown, click
Click Here to Scan all
.
5. Do one of the following:
• To connect to the network with username and password authentication, select the SSID
of the access point that is secured by 802.1X.
Your unit can now connect to the network with a username and password.
-OR-
• To connect to the network with EAP-TLS authentication:
d. Select the 802.1X (TLS Certificate) checkbox.
Additional settings appear.
e. Enter the Identity.
f. Upload the Authority CA, User Certificate and Key files and click Apply.
VIA Connect² automatically reboots and is now connected to the 802.1X
network.
Accessing System Controls
Use the Gateway Dashboard to change VIA Connect² operating system controls such as
audio settings, display settings, and system health. You can also view log files and activate
your VIA Connect² license.
The log folder is only available if system logging is activated in the Gateway Management
Pages (see
Viewing and Searching System Activity Logs on page 74).
VIA Connect² unit is pre-activated by Kramer. If your license has been revoked, you
To Next Page
Loading...
