Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
• Digital Signage on page 66.
• Reports on page 74.
Logging in to Gateway Dashboard Page
The Gateway Dashboard Page enables you to configure your VIA Connect² gateway device.
It is accessed from any system connected to the same network as your gateway.
To log in to the VIA Connect² Gateway Dashboard Page:
1. Connect your system to the same network to which VIA Connect² is connected.
2. Open a Web browser and go to the IP address for your VIA Connect² unit.
The VIA Collaboration Hub page appears.
Figure 7: VIA Collaboration Hub
3. Click Manage Gateway Settings in the upper right corner.
The Administrator Login page appears.
4. Type a Web Administrator Username (default = su) and Password (default = supass). To
change the password, (see Changing VIA Password on page 127
).
Figure 8: Administrator Login Page
To Next Page
Loading...
