Kramer Electronics Ltd.
VIA Connect² – For Installer: Connecting VIA Connect²
Connecting Main Display
The main display is the screen connected directly to VIA Connect². When VIA Connect² is
booted up, the VIA gateway screen appears on the main display. All collaboration activity is
then displayed here.
VIA Connect² enables connecting the following display type:
• HDMI – The HDMI OUT Connector connects to any compatible projection or direct-
view display, such as an LCD monitor. This connection can be routed and switched.
VIA Connect²’s internal video card reads the EDID (Extended Display Identification Data) for
any connected display and sets the optimum display resolution and image refresh rate
automatically through the display connectors.
To Next Page
Loading...
