Kramer Electronics Ltd.
VIA Connect² – For User: Connecting via VIA Connect²
Joining a Room with the VIA app
1. Make sure you are connected to the same network as the VIA Connect² device.
2. Open your installed VIA app.
If you are using a VIA Pad, see Presenting from a VIA Pad on page 101.
3. In the Kramer VIA application, the Room Selection window appears.
4. To change the name used to identify you, click the pencil icon .
Figure 115: VIA App Window
5. Select a room or enter the IP address of the VIA meeting space you are joining.
6. A pop-up window will request that you enter the Room Code.
7. The VIA User Dashboard appears on your device screen: Continue with Presenting from
a VIA Pad on page 101.
To Next Page
Loading...
