Kramer VIA Connect2 - Presenting from the VIA User Dashboard

Kramer Electronics Ltd.
VIA Connect² – For User: Connecting via VIA Connect²
99
Presenting from the VIA User Dashboard
Invite additional users to the meeting
(generates an email with a link).
Leave the meeting.
1. Select what you want to share:
 Screen – Share your screen on the
Main Display. Click the down arrow
“Extend” (Windows only) to add the
main display as an extension screen of
your laptop, may install a screen driver.
 App – Share a window or
Third Party
Apps. .
 Media – Sharing Media from the User
Dashboard.
If Media is selected, a list of media is
shown to the right of the Share button.
 HDMI – Enable/disable sharing over an
HDMI connection.
2. Click SHARE:
 The SHARE button becomes the STOP
button.
 Your screen, app or media will be
displayed on the main display.
Figure 116: share
3. Interact with participants:
Click the green arrow to the right of
STOP:
 View the participants.
 Chatting and File Sharinge t
o
participants.
4. C
ontrol what you share:
4 buttons below STOP, green = active.
Pause sharing -–Your screen freezes
on the main display (the VIA app is
minimized).
Present privately—No one else can
present (was “Do Not Disturb”).
Maximize your display.
Allow remote control – Enable other
users to control your device in
Collaboration mode.
 Volume
control for shared media.
Figure 117: Interacting with Participants
5. Collaborate on the main display:
3 or 4 buttons at the bottom of the User Dashboard
Collaboration – Adds a Collaborating on the Main Display
on
the main display, blue if
collaborating.
W
hite board – Opens Whiteboard Tools on page 114 on the main display, lights blue if active.
View display – View a copy of the Main Display on your personal device (not if presenting).
Moderator – Visible if Moderating is permitted, orange when moderating.