Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
• Webadmin Activity Log – Shows activity of the Gateway and Gateway Settings
embedded web pages.
To view and search the system activity logs:
1. Click Reports > Webadmin Activity Log / Gateway Activity Log on the navigation
pane; The Webadmin Activity Log / Gateway Activity Log page appears.
Figure 87: Web Activity Log Page
2. Select the date range of the log entries to be displayed.
3. Enter a search term and press the Enter key.
The filtered search results appear in the table at the bottom of the page.
Export to PDF or Export to CSV to save a file of the log table on your computer.
Updating Firmware
VIA Connect² enables you to update your VIA Connect² firmware.
If you are running a firmware version lower than 3.3, you have to get it sequentially upgraded
to 3.3. For example, you are running version 3.1.0121.1161, then you first need to upgrade
the firmware version to 3.2.0721.1198, then yiu have to upgrade it to
version 3.3.0722.1240
and then upgrade it to the latest version. For firmware versions more than 3.3, you can
directly upgrade it.
In this case, use ONLY the .zip file available for download from our technical support web
page:
https://k.kramerav.com/support/downloads.asp. Select VIA Connect² from the
upload process and then the unit reboot may take a few minutes.
To Next Page
Loading...
