Kramer VIA Connect2 - User Management

Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
17
User Management
This section describes how to add user accounts to the database of your VIA Connect²
device. A user account is required for the Gateway Dashboard Page and if your VIA
Connect² is in Database mode (see Moderator Mode on page 52
),
a user account is required
to join a VIA meeting.
To add a user account to your VIA Connect² d
atabase:
1. Click User Management on the Gateway Dashboard Page navigation pane.
The User List page appears.
Figure 10: User Management Page
2. Click Add User.
The Add User window appears.
Figure 11: Add User Window
3. Type the new Username, Password and Confirm Password.
4. Under User Role, select from the following administrative levels:
 Web Administrator – Access to change all system settings, including Digital
Signage.
 Digital Signage – Able to configure the Digital Signage only(see Digital Signage
on page 66). This is only visible when Moderator mode is enabled.
5. Select one of the following participation levels: