Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
Configuring VIA Settings Template
VIA Connect² enables you to configure settings such as power saver, time & date, audio, and
features availability and save them as part of a settings template. This enables you to define
and save different settings for different types of meetings. Just load the appropriate template
to match your needs.
To create a new gateway settings template:
1. Click DEVICE MANAGEMENT > VIA Settings on the navigation page.
The VIA Settings page appears.
Figure 43: VIA Setting Page
2. Click Create New Template.
The Configurations Template Creation page appears.
Figure 44: Configuration Template Creation Page
3. Enter a name for the new template and click Save.
The new template is saved.
4. Open the different settings pages by clicking on the navigation pane on the left and
change settings as needed.
To Next Page
Loading...
