Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
5. As you change settings on each page, do one of the following:
a. Click Save to save the template.
Changes are saved and the template remains open for more edits.
A popup appears that confirms the template has been created successfully. Click
OK.
-OR-
b. Click Save & Publish to update the template and apply the newly edited template.
Changes are saved to the template, and the session resets with the new template
applied. This will take several moments, and you will need to log back into the
Gateway Dashboard Page.
6. Cancel – It will close the template and navigate you to Via Settings Template List page.
VIA Connect² enables you to configure the following types of settings that apply to the
settings template:
• System on page 46
.
• Presentation on page 48.
• Power on page 50.
• Date/Time on page 50.
• Moderator Mode on page 52.
• Audio on page 56.
• Security on page 57.
• Certificate on page 58.
• NTP on page 58.
• Proxy Server on page 59.
• VIA Connect²: Features on page 60.
To Next Page
Loading...
