Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
System
Configure the following settings in the VIA settings template that affect the overall operation
of the system:
Figure 45: System Setting Tab
• If you enter a name in the Custom Room Name, it does not change the IP address, but
adds a custom name that can make it easier to identify and remember the meeting space.
This name appears in the meeting space list along with the IP address. A participant can
start typing the custom name instead of the IP address to join the meeting.
• Custom room names only work if DNS (Network Settings > Static> Gateway IP) has
been configured to properly redirect the Room Name to the appropriate IP address or if
broadcast is working in your network environment, we recommend adding a text field
and including the VIA’s IP address on the wallpaper as well as the custom name.
• If Host is selected, host name will appear on the screen. It will be a non-editable field.
• Access Point will appear if Wi-fi (AP Mode) is enabled in the network settings. If Access
Point is selected, the field becomes non-editable, and it will show the SSID created in Wi-fi
AP mode.
Figure 46: Access Point
To Next Page
Loading...
