Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
To Activate your VIA Connect² license:
If a Digital License is already installed on your device, the name of the license appears on the
bottom of the page.
1. Select UTILITY > VIA License on the navigation panel.
The VIA License page appears.
2. Click Activate License (only available if not activated already).
The VIA Connect² license is activated, and license information appears at the bottom of
the page.
Digital Signage License
devices have a built-in digital signage license.
Resetting Default Settings
VIA Connect² enables you to reset VIA Connect² to factory defaults.
Resetting Calendar Settings removes the calendar settings from the unit and credentials will
be required to renew synchronization to your calendar.
The applied changes take effect once VIA is rebooted or the VIA session is reset.
Figure 91: Factory Reset Page
To reset default settings:
1. Click Utility > Maintenance on the navigation panel.
The Maintenance page appears.
2. In the VIA Default Reset, select the default configurations you would like to reset or click
Select All to select all settings.
3. Click Apply.
Default settings reset after reboot.
To Next Page
Loading...
