Kramer Electronics Ltd.
VIA Connect² – For User: Connecting via VIA Connect²
To mirror your screen using AirPlay Services:
1. Connect your Apple device to the network that VIA Connect² is connected to.
2. For iPhone or iPad/Mini iPad: Swipe from the upper right corner to reveal the Control
Center and click Screen Mirroring.
For Mac Books and Apple Computers: Click the AirPlay icon on the Apple Menu Bar,
located in the top right corner of the screen, near the clock.
The Screen Mirroring list appears.
3. Select VIA Connect²’s AirPlay device name (default = VIA_AirMirror_XXXX, where
XXXX is a random combination of letters and numbers).
If the room code is enabled, a message appears asking you to enter the code.
4. Type the code that appears on the VIA Connect² main display (if activated).
Mirroring starts, and your screen appears on the main display.
To disconnect iPhone or iPad/Mini iPad and stop mirroring:
1. Swipe from the upper right corner to reveal the Control Center.
2. Click Stop Mirroring: Mirroring stops.
Mirroring Using Miracast
VIA Connect² enables you to use the native Miracast feature on your Windows 10 laptop or
Android device to mirror your screen on the main display.
This feature must be enabled by the Web Administrator (see
Presentation on page 48).
VIA Connect² you need a Windows 10 laptop or an Android device that
If the drivers of your Windows10 laptop are up to date and the “Connect to a wireless
display” option is not available, your device does not support Miracast.
Android operating system versions 4.2 and higher include built
-in Miracast technology.
However, some Android 4.2 and 4.3 devices do not support Miracast.
Mirroring Windows 10 Laptops Using Miracast
To mirror a Windows 10 laptop using Miracast:
1. On your Windows laptop, press Windows + K.
The Room Name of your VIA collaboration device appears in the Connect list.
2. Click the Room Name of your VIA device. A PIN code field appears (if Code was
activated on your VIA device).
Allow input from a keyboard… checkbox to enable another participant to
control your laptop from the main display.
3. Enter the Code that appears on the main display and click Connect.
To Next Page
Loading...
