Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
If we click DHCP, it will take the IP automatically.
Connecting VIA Connect² to a Wi-Fi Network
VIA Connect² enables you to wirelessly connect your VIA Connect² device as a client device
to your main network.
To set up Client Wi-Fi mode:
1. Click Device Management > Network Settings. The Network Settings page appears.
2. Click WiFi. The WiFi tab appears.
3. Click the Switch On/Off Wi-Fi switch: The switch turns green and the Wi-Fi settings
appear.
4. Click Client Mode.
Figure 13: Client Mode
5. If you do not see the desired network, click Click Here to Scan all Networks.
6. Select Hidden Network or Enable Dual Network.
Hidden network – User need to enter the SSID manually. To connect to hidden
network, SSID needs to be known to the user. Wi-Fi name will be Hidden Network
Enable dual network: The user will be able to connect with 2 networks (Wi-Fi and
LAN).
To Next Page
Loading...
