Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
2. Click the Activate Moderator Mode switch and select Active Directory.
The Active Directory settings appear.
3. In the Active Directory Domain text box, enter the Active Directory domain name.
4. Select User principal name or Same account name.
5. Select the Group Based or OU Based radio button as per your Active Directory
configuration.
6. Based on the above selection, type the name of the Moderator and Participant
Group/OU in their respective boxes.
7. Login the Gateway Dashboard settings (see Logging in to the Gateway Dashboard
on page 81) and select LAN settings.
8. Click on the Host Configurator.
The Host configuration page appears.
Figure 63: Host Configuration Page
9. On the Host Configuration page, enter the Active Directory server IP >> Space >>
Active Directory Domain Name and click Save.
Active Directory Moderator Mode is configured.
Connect² does not discover and connect to the Active Directory; rather it relies on
you to correctly enter the details. If there is a typographical error in any of the fields, the
users (Moderators and Participants) cannot log in.
further details, refer to “VIA Integration into DNS and Microsoft Active Directory”
To Next Page
Loading...
