Kramer VP-427X1

Kramer Electronics Ltd.
VP-427X1 – Using Embedded Web Pages
21
Using Embedded Web Pages
VP-427X1 can be operated remotely using the embedded Web pages. The Web pages are
accessed using a Web browser and an Ethernet connection.
Before attempting to connect:
• Perform the procedures in Operating via Ethernet on page 18.
• Ensure that your browser is supported.
The following operating systems and Web browsers are supported:
Operating Systems
Browser
Windows 7
IE
Firefox
Chrome
Safari
Windows 10
IE
Edge
Firefox
Chrome
Mac
Safari
iOS
Safari
Android
N/A
Some features might not be supported by some mobile device operating systems.
VP-427X1 enables performing the following:
• Loading and Saving Configurations on page 23.
• Entering Standby Mode on page 23.
• Configuring Video Input Settings on page 24.
• Selecting an Input on page 25.
• Freezing or Blanking the Video Output Signal on page 25.
• Adjusting the Output Volume on page 25.
• Upgrading the Firmware on page 27.
• Configuring Network Settings on page 28.
• Performing Device Soft Factory Reset on page 29.
• Configuring Video Output Settings on page 29.
• Configuring HDCP per Input/Output on page 30.
• Managing EDID on page 31.
• Adjusting the Audio Delay and Volume on page 33.