Upgrading the Firmware
To upgrade VP-427X1 firmware:
1. Click Device Settings on the Navigation List.
The Device Settings page appears (see Figure 15).
2. Under Firmware Update, click Choose File.
A file browser appears.
3. Open the required upgrade file.
The file name appears on the web page.
4. Click Upgrade.
a confirmation window appears.
5. Click OK. The new firmware is uploaded:
Figure 16: Device Settings Page –New Firmware Uploaded
6. Once the file is uploaded follow the instructions on the web page:
The new firmware is uploaded:
Figure 17: Device Settings Page – New Firmware File Uploading Complete
7. Re-enter the IP address and refresh the web page.
8. Make sure that the new version appears on the lower left side of the web page.
Figure 18: Current Firmware Information Display
Firmware upgrade is complete.
To Next Page
Loading...
