4. Set the tunneling port number (5100, by-default) and click Port Set.
5. Send the display RS-232 commands via HDBT Ethernet tunneling.
Commands are sent to the display via HDBT Ethernet tunneling.
Managing Authentication
By default, the web pages are not secured. This section describes how to change the
password and disable/enable access permission.
You can perform the following functions:
Securing Web Pages
To secure the Web pages with a user name and password:
1. In the Navigation pane, click Authentication. The Authentication page appears.
Figure 42: Authentication Page
2. Check Authenticate Web Pages access to indicate that you want the web pages to
lock.
3. Fill in a user name (the default is Admin).
4. Fill in a password (the default is Admin).
To Next Page
Loading...
