VP-427X1 – Using Embedded Web Pages
Performing Device Soft Factory Reset
VP-427X1 enables you to reset to factory default settings, with or without resetting the IP
parameters.
To perform soft factory reset:
1. Click Device Settings on the Navigation List.
The Device Settings page appears (see Figure 15).
2. Click Soft Factory Reset to restart the unit.
IP address values and User/Password settings do not return to their factory default
parameters.
The device resets.
For full factory reset, see Performing a Reset on page 18.
Configuring Video Output Settings
VP-427X1 enables you to configure settings for the video that is passed through the HDBT
and HDMI outputs.
To configure video output settings:
1. Click Output Settings on the Navigation List.
The Output Settings page appears.
Figure 20: The Output Settings Page
To Next Page
Loading...
