EasyManua.ls Logo

Kramer VP-427X1

Kramer VP-427X1
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Kramer Electronics Ltd.
VP-427X1 Technical Specifications
49
Default Communication Parameters
RS-232
Baud Rate:
115,200
Data Bits:
8
Stop Bits:
1
Parity:
None
Command Format:
ASCII
Example (Route video HDBT INPUT to HDMI OUTPUT):
#ROUTE1,1,1<CR>
Ethernet
To reset the IP settings to the factory reset values go to: Menu->Setup -> Factory Reset-> press Enter to
confirm
IP Address:
192.168.1.39
Subnet mask:
255.255.0.0
Default gateway:
192.168.0.1
TCP Port #:
5000
UDP Port #:
50000
Default username:
Admin
Default password:
Admin
Factory Reset
OSD
Go to: Menu > Factory > select either Reset (full reset) or a Soft Reset (reset
device information excluding Ethernet parameters).
Front panel buttons
Press the Reset to XGA/1080p Button while plugging the power to reset the
machine.
Embedded web pages
Device Settings > Soft Factory Reset.
Default EDID
Monitor
HDMI input
Monitor
Model name............... VP-427X1
Manufacturer............. KMR
Plug and Play ID......... KMR061D
Serial number............ 49
Manufacture date......... 2018, ISO week 6
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. Monochrome/grayscale
Screen size.............. 310 x 170 mm (13.9 in)
Power management......... Standby, Suspend
Extension blocs.......... 1 (CEA/CTA-EXT)
-------------------------
DDC/CI................... n/a
Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.40
Red chromaticity......... Rx 0.611 - Ry 0.329
Green chromaticity....... Gx 0.313 - Gy 0.559
Blue chromaticity........ Bx 0.148 - By 0.131
White point (default).... Wx 0.320 - Wy 0.336
Additional descriptors... None
Timing characteristics
Horizontal scan range.... 15-136kHz
Vertical scan range...... 23-61Hz
Video bandwidth.......... 600MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 3840x2160p at 60Hz (16:9)

Other manuals for Kramer VP-427X1

Related product manuals