Controlling VP-427X1 via the RS-232 Port
Connect the RS-232 port to a system controller to control the VP-427X1.
To control VP-427X1 via RS-232:
1. Connect a controlling system to the RS-232 port
(see Connecting to VP-427X1 via RS-232 on page 8).
Figure 27: Local Scaler Control
2. Click RS-232 on the Navigation List. The RS-232 page appears.
3. Set “Use RS-232 Port for control of” drop-down box to Scaler (local).
Figure 28: RS-232 Page – Controlling the VP-427X1
RS-232 port is used to control the VP-427X1.
To Next Page
Loading...
