Kramer VP-440X

Kramer Electronics Ltd.
VP-440X – Operating and Controlling VP-440X
12
Adjusting Image Parameters
VP-440X enables adjusting the image parameters such as contrast, brightness and so on.
To adjust the image parameters:
1. On the front panel press MENU. The menu appears.
2. Click Picture and define the image parameters according to the information in the
following table:
Menu Item
Function
Contrast
Set the contrast.
Brightness
Set the brightness.
Finetune
PC
PHASE – Adjust the phase of the VGA input sampling.
CLOCK – Adjust the VGA input clock sampling rate.
H_POSITION – Set the vertical position of the image on the
VGA input.
V_POSITION – Set the horizontal position of the image on the
VGA input.
Video
HUE – Set the color hue.
SATURATION – Set the color saturation.
SHARPNESS – Set the sharpness of the picture.
NOISE REDUCTION – Select the noise reduction filter: Off
(default), Low, Middle or High.
Color
Set the Red, Green and Blue shades.
Image parameters are adjusted.
Selecting an Input Signal
Select the VP-440X input source via the OSD menu.
To set the input source:
1. On the front panel press MENU. The menu appears.
2. Click Input and select the Source:
▪ HDMI 1 (default), HDMI 2, HDMI 3, HDMI 4.
▪ PC.
An input signal is selected.