Need help?Do you have a question about the Kramer VP-773A and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Model | VP-773A |
| Max. Data Rate | 10.2 Gbps |
| HDCP Compliance | Yes |
| Audio Support | LPCM, Dolby Digital, DTS |
| Audio Embedding | Yes |
| Audio De-embedding | Yes |
| Power Supply | 100-240V AC, 50/60Hz |
| Control | RS-232, Ethernet, IR |
| Size | 1U |
Crucial safety precautions for operating the VP-773A, including electrical safety and handling.
Explanation of High-bandwidth Digital Content Protection compliance for HDMI and HDBaseT outputs.
Details settings for display mode, input source, and input settings like resolution and HDCP.
Covers audio settings like volume, balance, treble, bass, and mic effects.
Provides settings for brightness, contrast, color, black level, gamma, and dither.
Defines aspect ratio, overscan, output resolution, and master connection settings.
Overview of front panel buttons and their functions for device control.
Explains how to control PiP windows, main windows, and system parameters via OSD.
Details remote control of the VP-773A using a web browser via Ethernet.
Explains how to use the IR remote control transmitter for operating the VP-773A.
Details the main web interface for routing, scaling, and input management.
Covers firmware upgrades, Ethernet settings, and device reset options.
Allows labeling inputs and defining settings like color space, deinterlacing, and HDCP.
Defines output parameters including resolution, aspect ratio, deep color, and power-save.
Covers general and microphone audio settings, including talkover and mix modes.
To Next Page
