The Process menu functions are available for interlaced video processing
only and not for progressive scan.
Set the deinterlacing method to:
Line Doubler – reduces the flicker and improves the quality of the
image to some extent M/P
Line doubler takes an interlaced scan, doubles the lines. The additional lines
provide a better quality image and a brighter output
Motion adaptive – to produce a brighter smoother and higher
resolution image M/P
Set the deinterlacing (per window) sync to:
Current Field – for a long delay M/P
Older Field – for a short delay M/P
When selecting Older Field, diagonal correction is disabled
Set to:
Off – for no pull-down M/P
Follow Input – to automatically identify the required pull-down (2:2 or
3:2 pull-down) M/P
24PsF – to force 24PsF pull-down M/P
Set the level of diagonal interpolation from 0 to 3.
When set to the lower level, the diagonal image does not appear
smooth M/P
Set (from Level 1 to Level 5) M/P
Select the motion detection sensitivity for filtering of interlaced images.
Set a high value for video where there is generally a large amount of
motion, or a low value for little motion
To Next Page
Loading...
