Kramer VP-773A - The Device Settings Page

60
VP-773A - Using the Embedded Web Pages
9.1.2 Swapping Inputs
Press the Swap Inputs button to swap between MAIN and PIP inputs.
Figure 43: The Routing & Scaling Page – The Swap Inputs
For example, if the MAIN window displays input 3 (HDMI 3) and the PIP window
displays input 1 (HDMI 1), these inputs swap places when clicking the Swap Inputs
button, so the MAIN window will now show HDMI 1 and the PIP window will show
HDMI 3:
Figure 44: The Routing & Scaling Page – Swapping the Inputs