Kramer VP-773A

20
VP-773A - The OSD Menu
6.2 The Input Menu
Figure 10: Input Menu
Setting
Function
Display Mode
Select the display mode (see Figure 11):
Single Window – single window mode operation with one channel displayed E
Picture in Picture (PiP) – dual window mode operation, a smaller window
superimposed over a full screen image (see Section 7.2) E
Picture + Picture (PoP) – dual window mode operation, both images appear
side-by-side and the aspect ratios of both images are maintained (see
Section 7.2) E
Split (SbS) – dual window mode operation, both images are placed side-by-
side with the same height (see Section 7.2) E
When selecting the dual window mode, set the Main window or the PiP window parameters
via Misc -> OSD -> Window Control (see Section 6.8)
Note that while browsing the OSD menu in the dual window mode, press of the PIP button
to instantly toggle the window control (between Main and PiP)
Customized – customized image size E
Note that any change in the output resolution may cause
disproportion or even cancel the window customization.
Input Source
Select the input source: HDMI1, HDMI2, HDMI3, HDMI4, PC1, PC2, CV or
DP M / P
Note that any change in the input source may cancel the freeze
and blank settings.