9.2.2 Factory Reset
You can reset the VP-773A parameters to their default state with or without the
Ethernet parameters (see Section 9.2.2.1), as well as reset the Web pages only
(see Section 9.2.2.2).
9.2.2.1 Device Reset
Click the Device reset button to reset the VP-773A to its default state. The following
window appears:
Figure 64: The Device Settings Page – The Reset Device Window
Check the box next to “Including Ethernet” to reset Ethernet parameters as well.
You will be asked to reload the page with the default parameter.
Figure 65: The Device Settings Page – The Reset Device Window Including Ethernet
To Next Page
Loading...
