9.9 The Security Page
The Security page defines two security levels:
No username or password required
Access to all settings requires a valid username and password
When security is activated, you can change the password
By default, the Security page is deactivated and there is no need to enter a
username and password to access the Web pages:
Figure 85: The Security Page – Security Deactivated
To activate security, press the ON button:
Figure 86: The Security Page – Activating the Security
Click OK.
The Web Page reloads and the following message appears for you to fill in:
Figure 87: The Security Page – Authentication Required
To Next Page
Loading...
