Kramer VP-773A

VP-773A - The OSD Menu
17
17
6 The OSD Menu
The VP-773A OSD menu lets you set the operation parameters for the:
 Main Window Control
 PIP Window Control
 Entire System Control
The nature of the operation setup appears in the OSD title, as shown in the
example in Section 6.1:
 The title line shows the control mode (Main, PIP or Entire system)
 Level 1 lists the main menu items
 Level 2 includes the second hierarchy level, below level 1
 Level 3 includes the third hierarchy level, below level 2
 Function, is the selectable parameter or numerical value and can appear either
under level 2 or 3
6.1 OSD Menu Operation Example
In the example illustrated below, the Master Connection is set to HDMI2 (see
Section 6.7).
The table below shows function 632 (from the Protocol in Section 13.2):
 6 in the hundreds, represents “Scale” which is the 6
th
menu item in the main
menu list
 3 in the tens, represents “Output” which is 3
rd
in the Scale menu
 2 in the units, represents “Master Connection” which is second in the Output
menu
Level 1
Level 2
Level 3
Level 4 (Function)
Range
Function
Scale (6)
Output (3)
Master Connection
(2)
HDMI1
0
632
HDMI2
1
HDBT
2
SDI
3