Kramer VP-773A

VP-773A - Controlling the VP-773A
47
47
8.3 Controlling via the VP-773A Web Pages
The Web pages are described in detail in Section 9. You can remotely operate the
VP-773A using a Web browser via the Ethernet connection (see Section 8.3.3). To
be able to do so, you must use a supported Web browser:
For Windows 7 and higher:
 Chrome version
35
 Internet Explorer (32/64 bits)
version 10
 Firefox version 30
For Mac (PC):
 Chrome version 35
 Safari 7
 Firefox version 27
For iOS:
 Chrome version 35
 Safari 7
For Android OS:
 Chrome version 35
 Safari 7
8.3.1 Connecting to the VP-773A via your Browser
Note that if the Protocol is set to Legacy (via the Miscellaneous menu,
see Section 6.8), the Web pages may not function properly.
Make sure that your PC is connected via a network to the VP-773A and do the
following:
1. Open your Internet browser.
2. Enter the unit’s IP number or name in the Address bar of your browser.
If you are using DHCP, you have to enter the name.
The default IP number is 192.168.1.39, and may be changed by the system
integrator
Figure 29: Entering the IP Number in the Address Bar
You can now control the machine via the Web page.