Kramer VP-773A - Figure 75: the Audio Settings Page - Setting the MIX Level; Figure 76: the Audio Settings Page - Output Volume Pre-Limiter

80
VP-773A - Using the Embedded Web Pages
If, for example, Mic 2 is set to Mix, the Mic 2 slider is enabled and you can set the
mix level:
Figure 75: The Audio Settings Page – Setting the Mix Level
You can set the maximum value of the Output Volume by using the pre-limiter on
the Output Volume slider. Slide the pre-limiter up or down to determine the
maximum allowed volume. The value below shows the maximum allowed value
selected:
or
Figure 76: The Audio Settings Page – Output Volume Pre-limiter