VP-773A - Flash Memory Upgrade
11 Flash Memory Upgrade
You can upgrade the VP-773A via the Kramer K-UPLOAD software. Two types of
upgrade files are available for upgrade: video core and audio/graphics (*.fct) and
peripherals (*.kfw).
Note that when uploading files via K-UPLOAD, you must close the embedded Web
pages.
The latest firmware version, the Flash Memory Upgrade user guide, as
well as the latest version of K-UPLOAD and installation instructions can
be downloaded from the Kramer Web site at
www.kramerav.com/downloads/
Note that if the Protocol is set to Legacy (via the Miscellaneous menu,
see Section 6.8), the Web pages may not function properly.
To Next Page
Loading...
