Scaled Outputs – 2 HDMI outputs and an HDBaseT TP output simultaneously
HDBaseT™ technology with a bandwidth of up to 6.75Gbps (2.25Gbps per
graphic channel)
System Range - Up to 130m (430ft) at normal mode (2k), up to 100m at normal
mode (4K), up to 180m (590ft) at ultra-mode (1080p @60Hz @24bpp) when
using BC−HDKat6a cables
For optimum range and performance using HDBaseT™, use
Kramer's BC−HDKat6a cable. Note that the transmission range
depends on the signal resolution, source and display used. The
distance using non−Kramer CAT 6 cable may not reach these
ranges.
Output Resolutions – HDTV and Computer Graphics up to 2K and
1080p/UXGA with selectable refresh rates
Multiple Aspect Ratio Selections – Follow input, follow output, best fit, letterbox
Multi-Standard Video support - NTSC (3.58/4.43), PAL (M/N/60) and SECAM
Built-in Time Base Corrector - Stabilizes unstable video sources
Built-in Proc-Amp with enhanced functions such as color correction, gamma
and dither
Input and output audio level adjustment
Balanced stereo audio inputs, with two unbalanced microphone inputs, as well
as digital stereo and balanced stereo outputs
Selectable Microphone talkover or mix modes
A built-in 2x10W power amplifier with speaker outputs on a 4-pin terminal block
connector
Automatic detection and selection of the HDMI and DP embedded audio. The
VP-773A automatically outputs the signal from the HDMI and DP embedded
audio inputs or performs an analog takeover to output the respective analog
audio input
Selectable Power Save modes for energy efficient usage
HDCP Compliant - The HDCP (High Definition Content Protection) license
agreement allows copy-protected data on the HDMI input to pass only to the
HDMI and HDBaseT outputs
To Next Page
Loading...
